Sand blasting:
We can blast most anything for you in our large blast bay.
Primer coat or basic painting service also available.
Primer coat or basic painting service also available.
We also accept
Personal checks &
Business checks
Personal checks &
Business checks
How do we price our blasting?
Pricing for most smaller projects is $50.00 labor. Customized pricing available for
multiple items. An abrasive media charge is then added on at the rate of $40.00
Per full bag used or down to 1/4 bag usage. Commonly one to four bags are
required for these types of projects. Media usage depends on a few factors and
will vary, even with what appear to be similar items. These factors include- The
shape, as in are there many angles to hit rather than large flat surfaces, concave
areas where media deflects back at the operator lowering visibility, coatings being
removed , and if there is deep rust pitting all contribute to the amount of time and
therefore media needed. Other factors include how clean a job you require. You
may only want rust and loose coatings removed so that a protective paint may be
applied or you may be looking for a clean final appearance. If you are going to
have an item powder coated then it is important to remove as close to 100% of the
existing coatings around welds and in small crevices so they will not burn in the
heat related process.
multiple items. An abrasive media charge is then added on at the rate of $40.00
Per full bag used or down to 1/4 bag usage. Commonly one to four bags are
required for these types of projects. Media usage depends on a few factors and
will vary, even with what appear to be similar items. These factors include- The
shape, as in are there many angles to hit rather than large flat surfaces, concave
areas where media deflects back at the operator lowering visibility, coatings being
removed , and if there is deep rust pitting all contribute to the amount of time and
therefore media needed. Other factors include how clean a job you require. You
may only want rust and loose coatings removed so that a protective paint may be
applied or you may be looking for a clean final appearance. If you are going to
have an item powder coated then it is important to remove as close to 100% of the
existing coatings around welds and in small crevices so they will not burn in the
heat related process.
Hours of Operations
Mon / Fri
8:30 / 5:00pm
Mon / Fri
8:30 / 5:00pm
Pricing guide
The photos below will give you an idea of what to expect for your particular project.
Wrought iron with its many
angles. This one took three
bags.
angles. This one took three
bags.
Auto frames and bodies
Bird cage, four bags. Many
skinny wires and joints to
clean , prep for powder
coating.
skinny wires and joints to
clean , prep for powder
coating.
s.c.u.b.a. Equipment
about two bags
about two bags
Header- $50. Labor. Took
only about half a bag.
only about half a bag.
Bike frame- About two bags.
Frames are priced at $300. Labor plus $25
per bag. This frame took eight bags.
per bag. This frame took eight bags.
Bodies are priced at $60. Per bag used. This
job took 17 bags of glass to hit everything
inside and out and underneath.
job took 17 bags of glass to hit everything
inside and out and underneath.
Soda blasting is a non abrasive method of striping used for
fiberglass bodies to avoid damage. Soda can be used with
metal also to avoid heat build up and possible warping ,
but will not remove rust.
fiberglass bodies to avoid damage. Soda can be used with
metal also to avoid heat build up and possible warping ,
but will not remove rust.
Out side only of body, doors and hood were
striped on both sides. The paint on the roof was
rather heavy. This took 14 bags
striped on both sides. The paint on the roof was
rather heavy. This took 14 bags
Soda blasting is priced at $70. Per bag.
This 57 required the inside to be done as well. 24
bags were needed to complete this job. It had
multiple layers of paint and the concave areas can
use up some extra media.
bags were needed to complete this job. It had
multiple layers of paint and the concave areas can
use up some extra media.
Soda blasting
 | |  | |  | |  |
Glenmarc Auto Glass, Inc. & Mysprayliner.com @ 1109 South Hanover Street Pottstown, Pa 19465, Ph # 610-323-8084
With only one layer of paint, the back and
hood cleaned up well with 6 bags.
hood cleaned up well with 6 bags.
Steel and brass headboard. Black
tape was used to mask off brass.
Paint blew off with ease on this one
and no rust. About one bag.
tape was used to mask off brass.
Paint blew off with ease on this one
and no rust. About one bag.
Diamond plate aluminum stair tread. This one was
being re powder coated. The paint was flaking but the
diamond shapes must be hit on several angles and be
completely clean as well as the whole under side.
Though not a large piece, these took between two and
three bags of glass each.
being re powder coated. The paint was flaking but the
diamond shapes must be hit on several angles and be
completely clean as well as the whole under side.
Though not a large piece, these took between two and
three bags of glass each.
1109 South Hanover Street Pottstown,Pa 19465 P-610-323-8084,
Equipment Cleaning Services